Specification:
Detector distance | about  5-10 meter |
Angle | 180° |
Solar panel | 5.5V, 3.2W, 580mah, |
LED Source | 30lm/LED, SMD2835 Super bright LED x 48pcs |
Battery | 3.2V 4500mah Li Fe PO4 battery |
Brightness | 1100LM |
Solar charging time | >6 hours |
Product Dimension(L*W*H) | 23*10.3*8.3cm/9*4*3.3in |
Sensor Mode | 1.Motion Sesnor+dim light 2.Motion Sensor 3.Always light mode 4.Emergency light mode |
Net Weight | 630g(With gift box) |
Waterproof grade | IP65 |
Material | Aluminium alloy |
Package | 1pc/ gift box, 24pcs/carton |
Carton size | 48.5*32.5*37cm, Gross Weight: 15.5KG |
Package:
1 x Solar powered Microwave Radar Motion Sensor LED Light
2 x Screw set
1 x User manual
Product Details:
Product Performance:
1.during the daytime, the system is charging,and the light is turned off,at night,the system starts lighting automatically
2.each press of a button will replace a light mode,switch circularly
 A)power on:press and hold the button for 5-10 seconds to start the first mode.
 B)body sensor+micro-mode:when someone comes,the light will strong,when no one comes,the light will be bright slightly.
 C)human body induction mode:when someone comes,the light will strong,when no one comes, the light will turn off
 D)always light mode:it will always light at night,no induction function
 E)emergency light mode:it will be strong light for 30 minutes,and then turn off the light,the solar panel will time again after sensing the light.
 F)shutdown
3.it will work according to the installed mode every day, not need to switch again.
4.the delay time for a strong light is 15 seconds when someone is nearby,when in the induction area,the light is always bright, and when the person leaves the induction area for 15 seconds,the light enters into the power saving mode
Tips:
1. The On/Off switch is on the middle of upper edge of the front light cover (pls refer to image#4), use supplied key pin to activate it before using.
2. As in winter the sunshine becomes weaker than summer, please make sure the item is put in direct sunlight all day so that it can absorb more sunlight for charging.Â
Feature:
1. Using solar-charging system, light controller and human induction control. It would be charged during the day and lights up your walkway at night.
2. It is a great way to illuminate a pathway without any electrical wiring. No need any manual control for the button of light.Â
3. Automated switch - Auto on/off: Dim light when no motion / Bright light when motion sensor activating.
4. This solar light is built with high-quality aluminum alloy, highly weather-resistant.
Shipping:
1. FedEx/DHL/UPS/TNT for samples, Door-to-Door;
2. By Air or by Sea for bulk goods;
3. Customers specifying freight forwarders or negotiate shipping methods with us!
4. Delivery Time: 2-3 days for sample orders; 7-10 days for bulk orders.
Â
Specification:
Detector distance | about  5-10 meter |
Angle | 180° |
Solar panel | 5.5V, 3.2W, 580mah, |
LED Source | 30lm/LED, SMD2835 Super bright LED x 48pcs |
Battery | 3.2V 4500mah Li Fe PO4 battery |
Brightness | 1100LM |
Solar charging time | >6 hours |
Product Dimension(L*W*H) | 23*10.3*8.3cm/9*4*3.3in |
Sensor Mode | 1.Motion Sesnor+dim light 2.Motion Sensor 3.Always light mode 4.Emergency light mode |
Net Weight | 630g(With gift box) |
Waterproof grade | IP65 |
Material | Aluminium alloy |
Package | 1pc/ gift box, 24pcs/carton |
Carton size | 48.5*32.5*37cm, Gross Weight: 15.5KG |
Package:
1 x Solar powered Microwave Radar Motion Sensor LED Light
2 x Screw set
1 x User manual
Product Details:
Product Performance:
1.during the daytime, the system is charging,and the light is turned off,at night,the system starts lighting automatically
2.each press of a button will replace a light mode,switch circularly
 A)power on:press and hold the button for 5-10 seconds to start the first mode.
 B)body sensor+micro-mode:when someone comes,the light will strong,when no one comes,the light will be bright slightly.
 C)human body induction mode:when someone comes,the light will strong,when no one comes, the light will turn off
 D)always light mode:it will always light at night,no induction function
 E)emergency light mode:it will be strong light for 30 minutes,and then turn off the light,the solar panel will time again after sensing the light.
 F)shutdown
3.it will work according to the installed mode every day, not need to switch again.
4.the delay time for a strong light is 15 seconds when someone is nearby,when in the induction area,the light is always bright, and when the person leaves the induction area for 15 seconds,the light enters into the power saving mode
Tips:
1. The On/Off switch is on the middle of upper edge of the front light cover (pls refer to image#4), use supplied key pin to activate it before using.
2. As in winter the sunshine becomes weaker than summer, please make sure the item is put in direct sunlight all day so that it can absorb more sunlight for charging.Â
Feature:
1. Using solar-charging system, light controller and human induction control. It would be charged during the day and lights up your walkway at night.
2. It is a great way to illuminate a pathway without any electrical wiring. No need any manual control for the button of light.Â
3. Automated switch - Auto on/off: Dim light when no motion / Bright light when motion sensor activating.
4. This solar light is built with high-quality aluminum alloy, highly weather-resistant.
Shipping:
1. FedEx/DHL/UPS/TNT for samples, Door-to-Door;
2. By Air or by Sea for bulk goods;
3. Customers specifying freight forwarders or negotiate shipping methods with us!
4. Delivery Time: 2-3 days for sample orders; 7-10 days for bulk orders.
Â
Toggle switches, also called On Off Toggle Switches, is often used as the switching device of the equipment stalls. Meanwhile, we are also offer our customers Key Switches , Metal Switches , Automotive Switches, Push Button Switches, etc.
The Electrical Toggle Switches is a manually controlled Toggle Switches similar to the dial switch. Most of this Latching Toggle Switches are widely used in on-off control of AC and DC power circuits, and are less commonly used in circuits of several kilohertz or up to 1 megahertz. Let's take a look at the following.
1. Splash-proof knob button switch
The panel is installed with a splash-proof `O` ring seal, and the knob is a ball. It is a splash-proof ball button knob switch. Its terminals are in a straight line and the bottom of the terminals is sealed with epoxy resin. Strong corrosion resistance, suitable for automotive parts
2. Vertical Mount Right Angle Toggle Switch
The vertical mounting of the terminals and the terminal pins are right-angled, so it is a vertically mounted right-angled toggle switch. Its contacts are gold-plated and highly reliable. Mostly used in anti-theft devices, alert system.
3. Bipolar single toggle switch
At the same time, the switch breaks the phase line and the N line and controls one branch. Therefore, it is a bipolar single toggle switches. The contacts are in 3PDT form and are used for multimedia speakers and stereos.
4. Standard surface mount unthreaded toggle switches
The terminal adopts the standard mounting mode. Its sleeve has no thread. It is called a standard surface mount screw-less switch. The contacts are SPDT and its electrical life is as high as 55,000. Used for medical equipment
5. Horizontally mounted right-angle toggle switch
Compared to the vertical switch, it only changes direction to horizontal, so it is horizontally mounted right-angle toggle switch. The contacts are double-pole double-throw and the bottom of the terminal is Epoxy Seal. Mostly used for computer peripherals.
Toggle Switches
Toggle Switches,On Off Toggle Switches,Micro Toggle Switches,Electrical Toggle Switches,Toggle Switch Function
YESWITCH ELECTRONICS CO., LTD. , http://www.yeswitches.com