I am an electronic enthusiast, like to delve into the end to see what happens, the same is true for mobile phone charging, and even bought a special USB watch to check the charging voltage and current. A few days ago, my wife clamored to buy a mobile power supply. She didn't see her only buying new ones. Her mobile phone is a Meizu PRO6, TYPE-C interface, I know my wife's, with a bunch of cosmetics is not too much trouble, with two data lines will be too much trouble, so there must be C port input, so that you can only bring a The line can be charged and discharged. Now because MICROUSB still occupies the mainstream, it also comes with TYPE-C and also has a MICROUSB input port. In this way, only two inputs can be used. Well, it is so to set a large range of MICROUSB and TYPE-C dual inputs.
After the selection, only the Patriots N1 and Taipower are left, all of which are double-input digital polymer 10000mah, 18650 directly pass out, fast does not matter, women do not, Yan value Certainly it is the first one that will not care about what chips to use, what the maximum power is. Take the two pictures to my wife (this kind of trivial matter has the final say, the big thing only find me), and finally decided to Taipower This, Patriot that is actually good, this is the problem of radish cabbage.
Taipower T100UC charging treasure 10000 mAh slim cute mobile power mobile power polymer display 69.9 yuan double input Tmall direct link Appearance Gallery 
After waiting for a few days and finally arrived, I couldn't wait to open it up. It was an empty box to take pictures here. Haha, Taipower T100UC-N thin and light polymer mobile power supply, the right upper corner read direct boarding, meaning it can be brought On the plane, in fact, as long as the provisions of the charging treasure is less than 20000mAH can be directly boarding, and then big will not succeed.
Inside the package is a power supply, a line, and a manual. The line is a hard point.
It looks very advanced
The measurements are 141*70*14mm, 240g weight is very light, plus two color design, it still looks very good value.
There are four interfaces, TYPE-C is designed on the side, followed by the MICROUSB port and two USB-A female ports in the front, the digital tube on the right is the digital display, then the switch is on the side, feel good.
The shell is made of an anodized aluminum alloy shell, plus the surface sandblasting, feel very good, in addition to the upper and bottom, other places are metal shells including a black section above.
The figure below shows that the bottom edge has cut a side again, but it is not known that the term is å•¥, which can prevent the shell from cutting hands.
The bottom parameters clearly indicate 3.7V10000mAH, 5V6200mAH, which means that the battery is 10000mAH, 6200mAH can be discharged at 5V after boost (measured at 2.1A), and the boost loss energy is basically conserved, so the conversion rate is still Yes, in the upper and middle level, millet 2 is about 6900mAH under 5V1A, and 1A Taipower looks like 6750mAH. The input and output are all 5V2A, which is a bit slower than fast charging. However, unless I use it urgently, I still use 5V to charge more.
The power display is digital, and it is clear that the digital display power is clear, but it is not absolutely accurate. It only provides a similar reference. 100 indicates that full power is still relatively accurate. After the USB test shows that after 100%, the current drops to the standby level of 22 mA. This is full of people.
This mobile power supply actually has a Lightning version, which is MICROUSB and Lightning dual input, convenient for Apple users, it is estimated that as the popularity of the C port is getting higher and higher, MICROUSB gradually eliminated, there will be Lightning and C port double Input version, expecting ing
The maximum output of a single port is 5V2.5A. The two port parameters are similar and should be output in parallel.
Because they are connected in parallel, the two ports can output at the same time, but the total current after the test is still about 2.5A, which is the maximum output current of the single port output. It is better to turn it into a mother port output. Fortunately, it is not necessary to output two ports at the same time. One port can satisfy the demand. If you need to reach 2A for both ports, you cannot select this one.
Power output with intelligent identification, compatible with Apple and most of Android's non-fast charge, charge my 80% of the power of the X7 can reach 1.6A current, can be considered 5V full speed.
Charging the mobile power supply can reach the maximum power of nearly 10W
The charging speed accords with the identification parameter, although the input and output are much slower than fast charging, but for those of us who do not need fast charging, it is still very suitable, and it is not possible to charge two and a half my X7 while playing while charging. The wife is also very satisfied with this appearance, that is, the battery indicator is so little, no serious problem, I think this is enough, on the right, is the best!
Advantages: 1, dual input
2, good value
3, thin and light
4, digital power
Disadvantages: 1, with USB cable is too hard
2, the dual-port simultaneous output and single-port output are 2.5A
The selling point of this mobile power supply is the dual input, plus the thin and light value, especially suitable for TYPE-C or lightning interface users, only need to bring a C line or Lightning line to go to achieve the charge and discharge, 5V2A charge and discharge For users who do not require fast charging, it is sufficient. The best one is suitable, and the one you like is the best.
Recommend Vape,Disposable Vape,Electronic Cigarette,Puff Bar Disposable Vape
Guangzhou Yunge Tianhong Electronic Technology Co., Ltd , https://www.e-cigaretteyfactory.com