The screen of the mobile phone begins to show the differentiation of LCD and OLED. The advantage of OLED is that the color gamut is wider, the brightness is higher, the power is more energy-saving, and it is also the golden partner of the special-shaped full screen/screen fingerprint. However, the LCD is in some high-end mobile phones and a large number of The middle and low-end mobile phones still occupy the main force.
As the world's leading panel supplier, LG's own new products seem to be in a dilemma.
According to ETNews, the LG G7 may use both MLCD+ and pOLED screens, and the specifications are the same.
MCLD+ is a new LCD technology developed by LG with a peak brightness of 800 nits and more power saving than IPS screens. pOLED is the product of LG against Samsung AMOLED, Xiaomi Note 2 first, followed by LG V30 mobile phone, Nokia 8 Sirocco, Google Pixel 2 XL and so on.
However, pOLED has a short time to go through the market test, and there are still gaps in AMOLED over many key details (such as burn-in rate, color registration, purity, and green edge).
For the time being, I don't understand the significance of mixing panels like LG. Of course, the two machines may not appear at the same time.
In general, manufacturers mix devices up to the manufacturer, and there is no gap in technology. For example, this year's P20/P20 Pro, the former is the LCD screen, the latter is the OLED screen, you can know the difference at a glance.
According to the current news, LG G7 will be released at the end of April, and will be sold in May. It will be equipped with Snapdragon 845 chip, bangs shaped screen design, and rear dual 16 megapixel camera.
57 Series Centronic Connectors
Current Rating:5A
Dielectric Withstanding Voltage:1000V for one minute
Insulation Resistance:1000MΩ Min.(at 500V DC)
Contact Resistance:35mΩ Max.
Temperature:-55°C to +105°C
57 Series Centronic Connectors
ShenZhen Antenk Electronics Co,Ltd , https://www.pcbsocket.com