This paper presents a simple PFC module parallel interleaved digital control scheme. Taking three modules in parallel as an example, using the average current control strategy, the parallel control of the DC-DC Boost-PFC module is realized with only one controller. The switching frequency is 120 kHz, and good current sharing performance is achieved, and the power switch tube is reduced. At the same time, their high-frequency switching phase is evenly increased by 1200, which realizes the interleaving of the inductor current, reduces the high-frequency ripple of the input current, and reduces the differential mode inductance of the input EMI filter. The experimental results prove the feasibility of the control scheme and provide a good solution for the digital control of the parallel power factor correction module.
Parallel block diagram of digitally controlled Boost PFC module
The above is part of the content, see the PDF document for more details!
Fiber Optic Lighting Membrane Switch
Fiber Optic Lighting Membrane Switch is a kind of fashion appearance, on the power supply will produce all kinds of light source around the switch of the film switch, and it is different from the general LED light film switch, Fiber Optic Lighting Membrane Switch compared to the LED light film switch luminous brightness and luminous color are better. The reason why Fiber Optic Lighting Membrane Switch has such a good effect and EL light chip is inseparable, understand the principle of EL light chip, in order to make a good light with Fiber Optic Lighting Membrane Switch from the principle.
Fiber Optic Lighting Membrane Switch,Membrane Switch For Pc Keyboard,Grey Keypad Membrane Switch,Matrix Membrane Switch
Dongguan Nanhuang Industry Co., Ltd , https://www.soushine-nanhuang.com