Many of my friend's box just arrived and always complained that the play was very card. The broadband used by Xiao Bian's home was ADSL access from Beijing Telecom 4M. Using the wifi access method, there is no problem with watching videos. Why do some people have good home network speed but watching the show is still very card. As a result, a few friends and colleagues knew that, let me bring it to use, and in the process. Suddenly found that the use of millet box speed test, some can only reach 380kb / s, and even a colleague's speed test is only 300KB / s. The speed of the process often appears sharp spikes, instability. Is the millet box really bad for WIFI?
After a tossing. Suddenly found a small method, there are ways to really improve the speed, the principle is not clear, but the actual use down, the worst speed only 280KB / S, actually increased and stabilized to 750KB / s test speed. This method is estimated to be of no help to a friend of the fiber access method. However, it may be effective for ADSL friends who have spent several years.
The millet box is very smooth to watch the video as follows:
The method is simple. You only need to restore the cat to factory settings, which may increase your speed. Note that instead of restoring your routing factory settings, you restore the factory settings of the dialing cat. Just use a toothpick and the like, insert the RESET empty on the back, it's OK, but different dialing cats. The method may not be the same. According to your cat, please check the recovery method. Commonly used hold for 5 seconds, and some take longer. There is also a power off and then on.
After a tossing. Suddenly found a small method, there are ways to really improve the speed, the principle is not clear, but the actual use down, the worst speed only 280KB / S, actually increased and stabilized to 750KB / s test speed. This method is estimated to be of no help to a friend of the fiber access method. However, it may be effective for ADSL friends who have spent several years.
The millet box is very smooth to watch the video as follows:
The method is simple. You only need to restore the cat to factory settings, which may increase your speed. Note that instead of restoring your routing factory settings, you restore the factory settings of the dialing cat. Just use a toothpick and the like, insert the RESET empty on the back, it's OK, but different dialing cats. The method may not be the same. According to your cat, please check the recovery method. Commonly used hold for 5 seconds, and some take longer. There is also a power off and then on.
Optical Rotary Sensor,Custom Encoder,Optical Encoder 6Mm Shaft,Handwheel Pulse Generator
Jilin Lander Intelligent Technology Co., Ltd , https://www.jilinlandertech.com