310-35L 1400-1500W Plastic Tank Wet Dry Water Dust Vacuum Cleaner Pond Cleaner with or Without Socket

Pond Cleaner
1400/1500/1600W
35L


OPTIONS:
1. 3-IN-1 : Wet & Dry Vacuum plus Pond Cleaner (Automatic activation and emptying).
2. Pond cleaner only, Activation and emptying control integrated in the handle.
3. Pond cleaner only, Automatic activation and emptying.
Feature
1) 4 castors for comfortable transportation
2) Carry handle and cable holder
3) Space saving accessory mount
4) Drainage hole cap (changes pond operation to wet/dry operation)
5)Activation and emptying control integrated in the handle: It has 12V switch integrated in handle of vacuum hose, you can set the position I or 0 of 12V switch to switch on / off the pond vacuum, if you feel no suction or suction is weak, it means the tank is full, you should switch off the vacuum to allow the water to drain, after that, you can switch it on again for vacuuming.  

Standard accessories
4pcs extension tubes (2pcs half-transparent and 2pcs black )
1 suction hose Φ35 mm
1 discharge hose with integrated blocking flap
1 combination nozzle for vacuuming solids and liquids over medium to large areas
1 crevice nozzle specially designed for cleaning cervices and edges
1 pond brush for removing pond sludge without taking in the pond gravel.
1 dirt catcher bag for collecting coarse particles, such as dead leaves or algae.
1 paper bag for vacuuming up fine dust.
1 foam filter for wet vacuuming Pond Cleaner
1400/1500/1600W
35L


OPTIONS:
1. 3-IN-1 : Wet & Dry Vacuum plus Pond Cleaner (Automatic activation and emptying).
2. Pond cleaner only, Activation and emptying control integrated in the handle.
3. Pond cleaner only, Automatic activation and emptying.
Feature
1) 4 castors for comfortable transportation
2) Carry handle and cable holder
3) Space saving accessory mount
4) Drainage hole cap (changes pond operation to wet/dry operation)
5)Activation and emptying control integrated in the handle: It has 12V switch integrated in handle of vacuum hose, you can set the position I or 0 of 12V switch to switch on / off the pond vacuum, if you feel no suction or suction is weak, it means the tank is full, you should switch off the vacuum to allow the water to drain, after that, you can switch it on again for vacuuming.  

Standard accessories
4pcs extension tubes (2pcs half-transparent and 2pcs black )
1 suction hose Φ35 mm
1 discharge hose with integrated blocking flap
1 combination nozzle for vacuuming solids and liquids over medium to large areas
1 crevice nozzle specially designed for cleaning cervices and edges
1 pond brush for removing pond sludge without taking in the pond gravel.
1 dirt catcher bag for collecting coarse particles, such as dead leaves or algae.
1 paper bag for vacuuming up fine dust.
1 foam filter for wet vacuuming

Control impedance PCB
Many customers asked us what information we need for impedence control PCB.Here,there are two types for PCB manufacturer,a is single impedance ,just one trace ,two holes .and b is differential impedance,it always go with 1 pair (two trace with same width and space). For single impedance,you just tell us the trace width one which layer and what value you require .For differential impedance,trace width/space,layers and value. Our experience engineers will calculate following your instruction with Polar software.We may change trace width/space or stackup ,but please do not worry, if any changes,we will send you to approve before proceeding. Generally,the tolerance is 10%,and more accurate is 8% .All impedance boards ,we will test here and report.

Impedance Control Board

Impedance Control Board,Impedance Controlled PCB,Gold Fingers PCB,Impedance Control PCB

Storm Circuit Technology Ltd , http://www.stormpcb.com