DIY Graduation Class Ring Favor Tags

Posted on

Need a graduation or end of the school year party favor? You can use tape to easily create personalized graduation tags and attach to your favorite candy.

We used UGlu® to assemble the tags!

Materials Used

  • UGlu® 1”x3” Strips
  • Scissors
  • Card stock
  • Ribbon
  • Ring candy
  • Printer to print your labels
Materials used to create class ring favor tags featuring adhesives in the UGlu® DIY Pack

1. Create Gift Tags

I used my personal desktop die-cutting machine and was able to size and cut my own foldable gift tags out of cardstock. They are approximately 3 inches wide by 5 inches long (before you fold). I added a ribbon to the top through the opening in paper and tied into a bow.

Start by cutting card stock to form the main folding tag.

2. Print your message

I simply designed the printable on my computer and printed out the labels on a lighter color of cardstock. They are approximately 1.5 inch circles when cut out. I was able to print 12 per page and with patience just cut out the circles by hand. You can also use your personal desktop die-cutting machine for this step as well.

Then print your message on a different color card stock and cut into shapes.

3. Assemble the parts with UGlu®

Apply a wide UGlu® 1”x3” Strip to the inside of your tag. The inside will serve a double purpose: it will hold your candy in place as well as securely seal your tag shut. I used one strip of the wide 1”x3” UGlu® per candy tag. I cut the UGlu® strip to fit my tag (you don’t want excess hanging off the edge) and used that extra slice of UGlu® for the front of tag to turn my cardstock labels into a sticker.

Other Notes:

UGlu® 1”x3” Strips: Can’t say enough about you! Everyone needs UGlu®! I love that the DIY Pack has a variety of sizes to play with. The 1”x3” strips are quick, easy to use and they sealed these gift tags in seconds! I didn’t have to deal with any messy glue or wait for dry time.

Using UGlu® 1”x3” Strips, I didn’t have to deal with any messy glue or wait for dry time.

A basket full of finished party favors.

Stainless Steel Radiator

Radiators in this case are manufactured with Stainless steel (SS304, SS316 and SS316L).
These radiators are manufactured with both 1mm CRCA sheet and 1.2 mm CRCA sheet as required and centre distance varying from 600 mm to 4000 mm. Stainless steel radiators can be offered with and without paint.
Through the method, the stainless steel plate type radiator for the transformer is simple in structure, free of complex treatment process on the surface of the radiator, not prone to oxidizing and corroding, long in service life, and high in welding strength.

Stainless Steel Radiator,Stainless Steel Transformer Radiator,Stainless Steel Cooling Radiator,Stainless Steel Weather Proof Radiator

Shenyang Tiantong Electricity Co., Ltd. , https://www.ttradiator.com