Floor heating pipe cleaning method

At present, there are three main methods for cleaning the dirt of the floor heating pipe: chemical immersion, projectile cleaning, and pulse wave physical cleaning. Each of these three methods has advantages and disadvantages, and users can choose at their discretion.

Chemical immersion cleaning: This floor heating cleaning method can fully dissolve the slime attached to the pipe wall. The high-quality food-grade raw material preparation used does not cause corrosion to the floor heating pipe and is thoroughly cleaned. The disadvantage of this cleaning method is that some market speculators often use low-cost strong acid preparations, which can cause corrosion to pipelines and related components.

Projectile cleaning: This floor heating cleaning method uses the friction between the cleaning cartridge and the pipe wall to remove the slime adhering to the pipe wall, and does not damage the floor heating pipe, and the cleaning is thorough. The disadvantage of this cleaning method is that the floor heating pipe needs to be disassembled. If the underground pipeline has a joint, the construction is very inconvenient and it is easy to cause the cleaning cartridge to be caught in the pipeline. In addition, it may cause secondary damage to the relevant parts of the original sub-catch, valves and the like.

Pulse wave physical cleaning: This floor heating cleaning method does not require chemicals, does not disassemble the floor heating pipe, and is thoroughly cleaned. Its unique cleaning principle can simultaneously clean the main pipe and valve of the floor heating sub-catch to avoid valve clogging caused by long-term scaling. The disadvantage of this cleaning method is that it is limited by space during construction. In particular, some users' floor heating manifolds are installed in concealed places, and the distance between the two ends of the manifold is too close to the wall, which makes the construction more difficult.

Underfloor heating and other heating methods are different. Floor heating usually starts 24 hours. Unless there is no one in the house for a long time, it will not be completely closed. The floor heating system is inevitably disturbed and destroyed during long-term operation. Generally, the floor heating is cleaned once every two years. The floor heating installation company will provide cleaning and maintenance for a few years. In the later stage, the floor heating can be cleaned by a professional floor heating company.

High Voltage Drone Battery

High Voltage Drone Battery,High Capacity Drone Battery,Drone battery of high performance,High Voltage Dc Battery

Shenzhen Jentc Technology Co., LTD , https://www.phenyee.com