Portable ultrasonic flowmeter

This is a compact and lightweight portable ultrasonic liquid flow meter.
Measurement data can be saved on the SD memory card.

Converter (Model: FSC)

Using SD Memory Cards to store long-term measured data Bands Consumption of calories Calculation function Display of flow rate distribution by Doppler (option) Reliance on battery-driven continuous operation for 12 hours with printer (optional) USB interface with convenient PC connection with printer (optional Accessories), Detector (Model: FSD) With Printer (Optional) Detector (Model: FSD)
Large LCD display consumes heat calculation function
Data stored on the SD memory card can be played back on the computer
The main specifications apply fluid homogenizing liquid ultrasonically permeable liquid water, hot water, distilled water, alcohol, milk, ethanol and other applicable pipe diameter φ13mm ~ φ6000mm (according to the detector may be determined) The measured fluid temperature -40 ~ +200 °C (according to Depending on the detector) Velocity measurement range 0 ~ ± 32m / s (minimum ± 0.3m / s) Measurement accuracy ± 1.0% of rate (according to the flow rate) Operation • Output cycle 1 second measurement line propagation time difference method (single measurement line ) Display with backlit color LCD analog output signal DC4~20mA (1 point) Analog input signal DC4~20mA/DC1~5V (2 points) Power Supply voltage Built-in battery (full charge state can work continuously for 12 hours) Converter structure IP64 Converter size 210×120×65mm Converter weight approx. 1kg SD memory card Standard accessory (256MB) Data about 1 year of serial communication data transmission (data stored in SD memory card such as instantaneous value and accumulated value) can be saved
Transmission distance using USB interface: 3m maximum function damping time constant (0 to 100 seconds)
Instantaneous value display (10 digits) and various flow unit settings can be used to display the accumulated value (10 digits) and various flow units. Sets the calorie calculation self-diagnosis (reduction of battery power, reception of signal waves from the sensor. diagnosis)
Flash memory (measurement parameters for pipes, fluids, sensors, etc.)
Number of registered measurement points 32 zero adjustments (based on zero/clear)
Positive and negative flow measurement Low flow cut-off (0 to 5m/s) Option with printer: Screen screen copy, regular print, record data Print pipe thickness gauge (in development): Measuring range 0.8 to 80.0 mm (Ultrasonic mode)
Doppler flow velocity distribution display: instantaneous, average flow velocity distribution display