The temperature inspection instrument is a device designed with a microprocessor (MCU) as the core, which can form a temperature data acquisition system and control system for on-site temperature signal acquisition, transmission output, control, remote transmission, communication and other processing. It is very suitable for multi-point measurement and control, one is equivalent to several ordinary temperature recorders. Compared with the traditional temperature detection scheme, the temperature patrol instrument has the characteristics of low cost, high detection accuracy, strong anti-interference ability, fast response time, long transmission distance, and convenient construction. With its powerful functions and unique advantages, it has been favored by users in recent years. In order not to affect its normal function, we need to follow some installation precautions, as follows:
Electromagnetic Interference Although the temperature inspection instrument has the characteristics of high reliability and strong anti-interference ability, excessive electromagnetic interference should be avoided.
Installation environment The cable of the sensor probe should be kept dry and clean during the wiring process, and should not be soaked in dirty water or other chemical substances. Do not come into contact with open flames. Temperature The working temperature of XW-THS intelligent temperature inspection instrument is -20~70℃, and the sensor probe can be used under the specified working temperature.
Vibration The selected installation location of the intelligent temperature patrol instrument controller should ensure that the module is not affected by the natural environment, temperature extremes or severe vibration. When vibration is inevitable in the use environment, vibration reduction measures must be taken, such as the use of vibration damping rubber pads.
Air Avoid corrosive and flammable gases such as hydrogen chloride, hydrogen sulfide, etc. For environments with more dust or corrosive gases in the air, the intelligent temperature inspection instrument can be installed in a control room or control cabinet with better sealing.
Power supply The power supply of the intelligent temperature inspection instrument should comply with the design regulations, using DC 9V~26V voltage, the power supply is reliable, and there is no large fluctuation.
Pmic Led Drivers,Ic Pmic - Led Driver,Pmic Led Driver Ic Chip,Pmic Led Drivers Ic
Shenzhen Kaixuanye Technology Co., Ltd. , https://www.iconlinekxys.com