Procrastination late, pick up home network equipment in mind: TL-SG108E v2.0 version, Leguang A600 ceiling AP, self-made cable material summary

Foreword

The purpose of writing this little note is the following:

Meyer direct mail TL-SG108E Simple network management switch with aggregation and VLAN, HP GEN8 2008R2 do aggregation (small information on the Internet, and V2.0 is different from V1.0)


Experience of using 11 ceiling AP (fat AP type)

Personal experience in making your own cable: materials, tools, notes

There are not many blueprints, and some of them are text-based.

In addition, as a weak electricity project, the weak electricity of his family dragged on for a long time before finishing (or because the eleven evils are all the bad weather and the bad weather has nowhere to go). It is also drunk to think about it.

Meyer Direct Mail TL-SG108E V2.0

First of all, thanks to the value of friends @ white fragrance posts (say it is so at not?)

There are detailed descriptions and operations of each setting page. Otherwise, I wouldn't waste my power to purchase this 8-port managed switch.

Because the seniors posted a lot of photos and sun drying, they did not make repeated pictures of drying, but only introduce differences.

There is a slight difference in the packaging of the box, there is no 5-year warranty and 7X24-hour customer service on the corner, instead of "BUSINESS SOLUTION"

At the reverse noodle code, the version number is updated to Ver 2.0. In addition, this 3W refers to power 3W? There is no need to feel under the ten thousand

Plug in a connection to buy overseas in Central Asia, there is no patience to buy the goods can be directly collected in the United States and Asia connected to the phone, brush every day to see.

The following is a web version (WEB side) login interface, which is different from Ver 1.0 and can only be operated with the software side.

The factory default IP and account secret are on the opposite side of the switch. When the computer is used for the first time, a static IP is set on the computer.

Which big god can be finished on NB

I think that changing the factory IP address to the corresponding IP address in the home or a new network segment does not need to introduce it.

Here to wake up:

Network port can only be aggregated with 1 and 2 or 3 and 4

When the HP GEN8 is not turned on, the switch light is 100M, and the setting page status is 100M instead of 1000M.

To do aggregation of 3 network ports and 4 network ports, please do not purchase this section

Take the software setup as an example, as shown in the figure, and click SAVE in the upper right corner (no point, close the window will prompt whether to save)

Enable loop detection to prevent yourself from obscuring the option of 2B event. That is, take both ends of a network cable into the loop on the switch.

This happened in a business unit, printers are often not connected, after tossing our maintenance personnel and printers N times, in the engine room at a root cable, while drawing PING printer, until the PING pass to find the corresponding outlets Actually, the staff privately connected to the wireless router and a network cable was double-inserted (much to be worried about white-collar workers nowadays, the IP address of the wireless router cannot be set to conflict, and the network cable is completely plugged in).

HP GEN8 mini server does aggregate operation when NAS, fools operate with 2008 R2

According to the forum's big introduction, quoted as follows:

"Gen1's LAN1, LAN2 are connected to switch's LAN1 and LAN2.

Windows Server sets up these two network cards to obtain ip dynamically.
A trunk is created on the switch. The trunk includes ports 1 and 2 of the switch. The protocol selects LACP active, which is equivalent to the switch-assisted link aggregation.
Windows Server on the HP network card management software (IP + Microsoft official original installation, will automatically include this software), select the need to aggregate LAN1 and LAN2, create Team, that is, aggregation. ”

Encountered during actual operation. . . HP's network card management software I seem to have no equipment or did not find, go to HP official website to find a face

Later I found it, named

HP Network Configuration Utility for Windows Server 2008 R2 (American, International)

The file name is cp023339.exe. After the installation, a small green icon in the lower right corner opens.

Select 2 network cards, the "Team" on the right will be combined into the following figure

At this time, it was not successful, and the attribute was set to "a fault-tolerant switch supporting the load balancing SLB".

Others do not need to operate, but have to go back to the earliest settings at the bottom of the hook "enable UID", determined to lose will be successfully saved.

After saving the white box becomes green, as shown below

And the network is 2Gbps

The purpose of doing the aggregation:

GEN8 provides dual network ports, which is not wasteful

Why is the switch so cheap?

Attached to the Internet part fool 8-port switch to buy records, disassemble, formerly Broadcom program, is now a small crab, so there is no pursuit is not iron shell, iron shell is not equal to good quality

Ceiling AP, Fat AP Leguang A600 Eleven Experience

Although the main route is now R6300V2, because the location and wall are not ordinary brick walls, the signal is really bad, and the traffic is often used to open the Internet. The Eleventh Fudge won't want to buy a ceiling fat AP to use (thin AP needs AC controller, or the virtual machine to open the software to control, but I do not cover multiple AP seamlessly, so no thin AP )

Before considering UBNT, Hwasan, Love, etc.

China Three is about a thousand yuan but fat and thin one feels unnecessary (not new home decoration on the dual-frequency AP is a bit boring)

Love fast dual-frequency ceiling AP, cheap is cheap, but to AC to control, is a pure thin AP, or to GEN8 installed a virtual machine to set love fast AP (listen to others is not set off But I feel too much trouble and no energy)

UBNT feels more popular, but also because it is not too frustrating

Finally entered the Leguang A600, Qualcomm AR9341 chip +64M memory +8M flash memory +535MHZ frequency, known as the amount of 40 units (can not be measured)

The price of 190 yuan to start, 24V POE power supply, with the box to send 24V POE power supply module, but the cable is only given a small short jumper

Reminder: POE has different specifications of 12V, 24V, 48V, not just talking about POE is equivalent to 100% support, villa coverage, then POE switch may also have to buy to strengthen the power supply version, conventional 24 port Huawei version of POE 48V is 180-200W, Calculated with an AP power of 15 watts, 24 ports can only receive 10 +, so Huawei also provides 500W power supply quotation is four or five thousand dollars. If the personal recommendation during the fit-up period is to use a centralized power supply solution when installing a 2-wire cable with a 2-core cable (RVV 21.0mm2 or 1.5), the cost will be reduced and the maintenance plan will be implemented. (Huawei S5700S-28P-LI-AC is only 2,000 yuan, a centralized power supply 200-400 yuan maximum, but provides the back-board bandwidth 256Gbps performance)

Unpacking, regular packaging

General version of the manual, do not take root, which describes the WIFI lights flash no signal, Chang Liang is normal work, the actual is a flash to work

The main body of the ceiling AP +24V POE power supply + short jumper + expansion screw, the top mounted bracket small plate has been pre-installed on the AP

Label information, PC need to set up an IP or not landing, this point in the description of the written and written method of operation

In addition, if you don't use a POE 24V power supply, you can use it with more than 12V at your fingertips. I'm going to use a 12V 2A good point power cord later, and the POE 24V power supply should be spared.

Body appearance

Flashing light

Lose the top of the wardrobe

Login interface, feel like a public version of the program?

Foolish running state, easy to use, the default WIFI name is wireless 2.4G

Four working modes, I chose the fourth, wireless AP

You can first look at the nearby channels to make it easier to choose a few

Set SSID, encryption method, password, channel, etc.

Restart after setting is successful

Log in again, you can see the settings, the new WIFI named A600 2.4G

Enter advanced settings, wireless settings, can be modified again, such as changing the channel width to 40MHz

11 holiday home at home, use more force than before, will not turn in the bed WIFI gone (no WIFI on the left side there is WIFI)

Broken Red Rice NOTE3 The whole network is equipped with 2.4G of R6300 V2 and 2.4G of the Leguang A600. Both are at 72Mbps, but when the latter is obviously used, I do not need to open traffic at home.

Suggest:

If necessary, it is best to ask if the merchant supports unconditional return. Try to stabilize the signal for 1-2 days before deciding to stay. After all, each room has a different room type and wall structure, which cannot cover hundreds of square meters as advertised. To the storm)

The new home decoration In order to better mobile Internet experience, you can put a ceiling AP in each place to manage with a thin AP (new homes have drawings, you can see which is the reinforced bearing wall which is ordinary brick, ordinary brick does not affect signal penetration, One type of load bearing is not available, and a room with a metal mesh reinforcement also requires a separate AP). The old house is usually brick, hall + bedroom + make up the bathroom/kitchen (because room type adjustment), can achieve seamless coverage


Personal experience in making your own network cable

Material is divided into cable, crystal head, crimping pliers, peeling knife, advanced labeling machine to do the label (personal experience, affordable choice, do not need to use the brain to tangled)

Network cable selection

Authentic AMP has been unable to buy, and now AMP's cabling business has been closed by CommScope. Even before, there is no need to blindly buy APM amps. So recommend the brand of cable by personality

NIPPON Daily Line 6

The official description of the product is quality, and there are 14 colors for you to choose. I believe that after I'm used to white blue, I see so many colors more like it.

As for the Nippon Dairy Line Co., Ltd., whether it is Japanese or Chinese who want to register, and it is completely out of control. The cable is made domestically. Foreign registered trademarks are used to play the remaining routines. Before the major forums, AMP's current NIPPON explanation is OK, and there are multiple detection certifications that don't need to be entangled.

3 yuan / meter, there are 100 meters and 300 meters FCL, home improvement is generally 100 meters enough, cloth more than recommended on 2 boxes 100 meters or 300 meters.

Multi-core six types of network cable, commonly known as cord, 8 cores are composed of multiple strands, often used for short jumpers on the cabinet, can be used at home, do crystal head and cable management more convenient (soft, and can be used 5 kinds of crystal head production, when the thread is not painful

It used to be a trading area on a digital forum, bought a purple/green cord, and now it's only white. It's slightly regrettable.

2.2 yuan / meter, 300 meters weight 12.5KG, the daily line is about 13KG.

The difference between the two network cables:

The daily line is hard, the soft line is soft, and the outer diameter of the daily line is one round (bulge)

The six lines on the daily line are recommended to be made of split six-type crystal heads, which are quick to use, but they are more likely to cause hand-wrenching pains; the cords can use super five crystal heads and can also use six types of monomers/separators, and the monomers are six types. Crystal head will be difficult to make.

Sixth-class and super-fifth-class households are all in Gigabit. The use of network cables to achieve short-range 10-Gigabit needs the support of switches and network cards. 99% of people will not buy them.

Home appliances do not need to shield the network cable, as well as strong and weak electricity crossing tin foil. . . Do not know where to install shielded cable popular fashion, the first use of crystal head and module shield, followed by equipment is not a metal RJ45 but plastic. . . In addition, strong and weak electrical interference is on the metal wire tube.

Other brands: It used to be a boat SHIP, but unfortunately it is now not to sell and the price is strictly protected by local agents. (Drunk, big projects bidding will not be purchased in different places, not to mention that the manufacturer's authorization is open to the company, not There will be dealer A and dealer B to fight it.) After AMP Ap Jing didn't make an imitation brand (XX amp, or Amp XX), CommScope's true and false couldn't be clearly identified. Take and I talk about 970 yuan / box, but Taobao understand, from 600-1000 yuan, the price is not necessarily true

Crystal head selection

Emphasis on the opening three times: AMP basically did not really, who is unlucky to pursue AMP, previously Jingdong self-employed only sold AMP Super five crystal head, there are no six types of crystal head, the head of the market AMP six crystal head plastic Not transparent but blue, recycled material mixed with blue powder, and no gold plated or polished copper pieces to light up, has encountered 10 rooms of the false AMP all six oxidation (copper rust) rework things

Brand: (do not insert a small card, small series do not suggest, this insert a small card to see the whole chaos)

SHIP a boat (have abandoned, can not buy online, do not buy, before the six types of split two-piece 120 yuan / box)


Solar wind (This type of brand merchandise is very fun, Super five crystal head is divided into 2 prices, nearly 1 times worse, the difference is that cheap gold plating is 2u, expensive is 6u, tooling to do the project with the former can save a sum of money, Six types of integrated crystal head is only nearly 50 yuan / 100, gold-plated 6u)

SHIPUCO XIPCO (The SPC on the head and jacket is short for quality. The characteristic is the round-pointed shrapnel. It uses the K1 and K2 cold heads with good, super five/six type integrated crystal heads respectively. Yuan/60 yuan, packing count a few brands sold well, but the six types of split called limit version, to 130 yuan / 50, split 2 pieces, the inside limit card is red, but the price reason Directly ignored. Never used, the crystal head should be a bit like CommScope's finished jumper)

Dong Lin BON (Used by the expensive, and Bay Bay production, by Shipco agents, Super five 60 yuan / box, six types of integrated 120 yuan / box, split two-piece 130 yuan / Boxes are all trifurcate gold tablets from Taiwan +15M)



Remarks: There are six kinds of splits, there are three kinds of (not jacket), but with a cross fittings, long like the H structure, more difficult, not recommended (of course with the head after playing More beautiful)

Six types of split, also called two pieces

The advantage is that the line is good, into a small limit card, set in the end plugged into the end of the cable jacket, cut off the excess line, directly into the crystal head inside, not like a style, when the crystal head is not skilled Mess

Six types of split type, 2 pieces + sheath

This set is from the above two models, coupled with the SPC plug (no claw type), Taobao is sold on the 1.6 yuan / set, this time home all use this kind of

Six types of split, three-piece, never used

Crystal head has been used for the cottage goods, 20 yuan / box of the pit to their own (10 computer room ... The problem is that the same group of people also done other sites also added thousands of crystal head, and there are outdoor ) has been afraid to speak with the leader

Crimping tool selection

The first use of the first work is enough, the family toss and earn back, buy 200-300 yuan can not be justified


Skinning knife attention

Things that have already been encountered by workers and cannot be fully used

First of all, the thickness of the outer diameter of the cable is different from that of the brand, and the peeling knife is obviously too tight.

Need to press the area as shown in the figure.

In addition, you can use an adjustable peeling knife, only occupy the place, and after the change of the cable brand to fine-tune the elastic

If you use a wire cutter to peel the handicraft, you will not hurt the inner core. If you use a small yellow knife, you will need to be careful.

2 hours replay crystal head, do the label effect as follows

Purple and green are cords, six types of red day line

Jacket is more refreshing without claws

When mesh 8

It can be seen that the six lines of the daily line are roughly one turn thicker than the ordinary six lines, and the structural reason

After tossing the crystal head, the label, and then toss the switch after the final effect

Now tangled, in the end it is horizontal or vertical, always feel uncomfortable, DC 5.5 interface is not comfortable in the back

Attached to the system diagram of EXCEL

Write and write for three hours, to sum up his torment, but also to write an experience for future generations. .

After seeing help lost gold coins like

After seeing a big difference, please click on the upper right corner to close the browser directly. There is no energy to quarrel.