Q1. Can I have a sample order for plaster light?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q2. What about the lead time?

A:Sample needs 3-5 days, mass production time needs 35 days for order quantity more than 10000 pcs.
 

Q3. Do you have any MOQ limit for led light order?

A: Low MOQ, 1pc for sample checking is available
 

Q4. How do you ship the goods and how long does it take to arrive?

A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
 

Q5. How to proceed an order for plaster light?

A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
 

Q6. Is it OK to print my logo on led light product?

A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
 

Q7: Do you offer guarantee for the products?

A: Yes, we offer 2 years warranty to our products.
 

Q8: How to deal with the faulty?

A: Firstly, Our products are produced in strict quality control system and the defective rate will be less 
than 0.2%.
Secondly, during the guarantee period, we will send new lights with new order for small quantity. For 
defective batch products, we will repair them and resend them to you or we can discuss the solution 
including re-call according to real situation.

Q9. Can you do ODM, OEM products?

  A: Yes, ODM, OEM order is accepted.

Q1. Can I have a sample order for plaster light?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q2. What about the lead time?

A:Sample needs 3-5 days, mass production time needs 35 days for order quantity more than 10000 pcs.
 

Q3. Do you have any MOQ limit for led light order?

A: Low MOQ, 1pc for sample checking is available
 

Q4. How do you ship the goods and how long does it take to arrive?

A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
 

Q5. How to proceed an order for plaster light?

A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
 

Q6. Is it OK to print my logo on led light product?

A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
 

Q7: Do you offer guarantee for the products?

A: Yes, we offer 2 years warranty to our products.
 

Q8: How to deal with the faulty?

A: Firstly, Our products are produced in strict quality control system and the defective rate will be less 
than 0.2%.
Secondly, during the guarantee period, we will send new lights with new order for small quantity. For 
defective batch products, we will repair them and resend them to you or we can discuss the solution 
including re-call according to real situation.

Q9. Can you do ODM, OEM products?

  A: Yes, ODM, OEM order is accepted.

Standard PCB

A Printed Circuit Board (PCB) mechanically supports and electrically connects electronic components using conductive tracks, pads and other features etched from copper sheets laminated onto a non-conductive substrate. Components (e.g. capacitors, resistors or active devices) are generally soldered on the PCB. Advanced PCBs may contain components embedded in the substrate.

PCBs can be single sided (one copper layer), double sided (two copper layers) or multi-layer (outer and inner layers). Conductors on different layers are connected with vias. Multi-layer PCBs allow for much higher component density.

FR-4 glass epoxy is the primary insulating substrate. A basic building block of the PCB is an FR-4 panel with a thin layer of copper foil laminated to one or both sides. In multi-layer boards multiple layers of material are laminated together.

Printed Circuit Boards are used in all but the simplest electronic products. Alternatives to PCBs include wire wrap and point-to-point construction. PCBs require the additional design effort to lay out the circuit, but manufacturing and assembly can be automated. Manufacturing circuits with PCBs is cheaper and faster than with other wiring methods as components are mounted and wired with one single part.

Here at BentePCB, Standard PCB means manufacture parameter in General requirements, no special features.

Parameter Definition of Standard PCB as below:

Items	Manufacturing Capabilities
Number of Layers	1-16 layers
Material	FR-4
Maximum PCB Size(Dimension)	650x1200 mm
Board Size Tolerance(Outline)	±0.2mm/±0.5mm
Board Thickness	0.8-1.6mm
Board Thickness Tolerance(t≥1.0mm)	±10%
Board Thickness Tolerance(t<1.0mm)	±0.1mm
Min Trace	0.1mm/4mil
Min Spacing
Copper Thickness	1oz(35μm)
Drill Sizes (CNC)	0.3-6.3mm
Min Width of Annular Ring	0.15mm(6mil)
Finished Hole Diameter (CNC)	0.3mm-6.2mm
Finished Hole Size Tolerance(CNC)	±0.08mm
Solder Mask	LPI
Minimum Character Width(Legend)	0.15mm
Minimum Character Height (Legend)	0.8mm
Character Width to Height Ratio (Legend)	1:05
Minimum Diameter of Plated Half Holes	0.6mm
Surface Finishing	HASL with lead
Solder Mask	HASL lead free
	Immersion gold
	Green ,Red, Yellow, Blue, White ,Black
Silkscreen	White, Black, None
Panelization	V-scoring,
	Tab-routing,
	Tab-routing with Perforation (Stamp Holes)

About Us:

BentePCB is a professional PCB manufacturing which is focus on double side, multilayer, HDI PCB , rigid PCB and Flexible PCB mass production. The company was established on 2011.
We have two factories together, The factory in Shenzhen is specialized in small and middle volume orders and the factory in Jiangxi is for big volume.

Why Us?

UL (E492586), ISO9001,  ISO14001, TS16949, RoHS certified.
Turnover USD 10-50 million per year.
15,000 sqm area, 450 staff .
Mass Production from single to 16 layers.
Special Material:ROGERS, Arlon, Taconic.etc.
Client:Huawei, SAMSUNG, Malata, Midea,Texas Instruments.etc.

Certification(UL:E492586, TS16949, ISO14001, ISO9001,RoHS):

Factory Tour:

Exhibition:

We Took part in the famous exhibitions over the past years,and got highly appreciation from the top experts,as well as cooperated tightly with them.

Delivery:

BentePCB offers flexible shipping methods for our customers, you may choose from one of the methods below.

We don`t just sell PCBs .We sell sleep.

Standard PCB

Standard PCB, Printed Circuit Board, Circuit Board, PCB Circuit Board

Shenzhen Bente Circuit Limited , http://www.bentegroup.com