1. Wearable computers and wearable wireless networks
1.1 The wearable computer is a new concept of mobile computing systems. Its concept originated in the 1960s. Since the 1990s, with the rapid development of large-scale and very large-scale integrated circuits, research on wearable computers has entered a new stage. Currently, there is no exact definition of the concept of a wearable computer. In general, wearable computers should have the following basic characteristics: they can be used in motion; they can be used to free up hands or other things; users can control; sustainable, diverse, ie different applications The wearable computer should be different in composition, function, etc., as can be seen from the above features. Wearable computers are more closely integrated with people than traditional computers. This requires that the wearable computer must adopt a new human-machine interaction technology to achieve a harmonious human-machine. This is also a hot issue in the current research on wearable computers and the difficulty that must be overcome.
1.2 Wearable Wireless Network In the wearable computer system described above, the hardware devices are mainly connected by a communication cable, and the operating platform used is also based on a wired device. Although this kind of system has its applicability in certain occasions, its shortcomings are obvious: First, it is not flexible enough. Because of the "hard" connection of communication cables, it is bound to affect the activity space and amplitude of the user's body, which is necessary in some applications, such as physical exercise.
Second, it does not consider integration with existing personal communication terminals (such as mobile phones, PDAs, MP3s, etc.). This would make existing communication terminals a separate and functionally overlapping device from the wearable computer entity.
In response to this situation, this paper proposes the concept of a wearable wireless network. Compared to wearable computers, wearable wireless networks have the following characteristics:
(1) Better flexibility.
(2) Fully consider the integration with existing personal communication terminals.
(3) It is possible to perform distributed control. This is because each communication terminal has certain computing processing power and storage capacity (and with the development of very large scale integrated circuits, the performance in this aspect is bound to be further improved).
(4) More humane. The user can select the appropriate primary communication device to control the entire network according to different applications, convenience levels, and personal preferences.
It can be seen that the wearable wireless network should have better applicability and wider application prospect than the wearable computer, and it can be developed on the basis of various existing wireless local area network technologies. Since the existing wireless LAN technologies are relatively mature, they have obvious advantages in development difficulty and development cycle compared to wearable computers.
Strain Insulator are used in guy cables supporting utility poles, to prevent any high voltage on the cable due to leakage currents or an electrical fault on the pole from reaching the lower part of the cable which is accessible by the public. Strain Insulators For Lines are also used in guys supporting radio antenna masts. Strain Type Insulator will normally installed in the middle of stay wire. Strain Post Insulator give protection in the event of accidentally broken live wire that can accidentally energizing a stay wire and remaining in contact with line which doesn`t trip.
Features
1.The ceramic is under compression rather than tension, which takes advantage of ceramic's greater compressional strength2.If the ceramic breaks the two wire loops are still linked and will not fall to the ground
3.Very long life, made of inorganic materials and do not age
4.Very reliable, with a proven track record. Over 80 years of experience
5.Easier to maintain, can be coated and washed
6.Strong in compression
The following strain insulators comply with the ANSI standard, the glaze colour of the insulators are brown etc..
| MAIN DIMENSIONS AND STANDARD PARTICULARS | |||||
| Type | 54-1 | 54-2 | 54-3 | 54-4 | |
| Creepage Distance,mm | 41 | 48 | 57 | 76 | |
| Main Dimensions | H | 89 | 108 | 140 | 171 |
| h | 44 | 57 | 79 | 67 | |
| h1 | 64 | 76 | 103 | 114 | |
| D | 64 | 73 | 86 | 89 | |
| d | 44 | 54 | 60 | 60 | |
| d1 | 16 | 22 | 25 | 25 | |
| Mechanical Failing Load,KN | 44 | 53 | 89 | 89 | |
| Low Frequence Flashover Voltage | Dry,KV | 25 | 30 | 35 | 40 |
| Wet,KV | 12 | 15 | 18 | 23 | |
| Net Weight, Each Approx., kg | 0.5 | 0.65 | 1.2 | 2.2 | |
We warmly welcome friends both domestic and abroad to visit our company, if you have any questions, please contact with us directly.
Strain Insulator
Strain Insulator,Strain Insulators For Lines,Strain Type Insulator,Strain Post Insulator
FUZHOU SINGREE IMP.& EXP.CO.,LTD. , https://www.cninsulators.com