When a new user uses a Kaibuler box, he or she can use the HDMI interface and the HDMI cable to quickly install it. If the home TV supports HDMI connection, it is really convenient. However, what if the home uses an old-fashioned CRT TV? What if the connection device does not have an HDMI connector? Don't worry, there are still ways to do it. Here's a quick introduction to the other ways of connecting and installing the open box.
Method 1, using an AV cable to connect
The operation procedure is very simple. After connecting the old TV to the TV box with three thirds of AV video cable, switch the old TV to AV mode (that is, the channel that often watches VCD TV), and you can watch the program and adjust the software normally. As shown below:
The box can also be connected to a computer monitor and projector. Just need to buy a HDMI to VGA cable. The HDMI connector is connected to the open-Borr box. The VGA connector is connected to the projector or computer display. After connecting, the program can be viewed normally.
Method 1, using an AV cable to connect
The operation procedure is very simple. After connecting the old TV to the TV box with three thirds of AV video cable, switch the old TV to AV mode (that is, the channel that often watches VCD TV), and you can watch the program and adjust the software normally. As shown below:
(Kaboer AV interface: Left, yellow, red, white interface)
(CRT old TV AV interface)
(Three-thirds AV cable)
Method 2: Box connection projection, display device (HDMI interface to VGA method) The box can also be connected to a computer monitor and projector. Just need to buy a HDMI to VGA cable. The HDMI connector is connected to the open-Borr box. The VGA connector is connected to the projector or computer display. After connecting, the program can be viewed normally.
(Kabo HDMI to VGA cable)
(projector VGA connector)
(Computer Monitor VGA Interface)
In addition, it should be pointed out that some display devices only have DVI interfaces. In this case, the method of connecting the boxes is the same. Just use a HDMI to DVI interface cable to achieve connection transmission. I hope the above method will help everyone. (Kaboon HDMI to DVI cable)
Gasoline Generator,Fule Tank Generator Set,Silent Trailer Diesel Generator,Small Diesel Power Generator
XCMG E-Commerce Inc. , https://www.xggenerators.com