Standard Four Elements (TSP, PM2.5, PM10, Noise) Dust Noise Pollution Monitoring System Background The site dust noise online monitoring system is a cloud-based industrial-grade modular monitoring system that integrates PM2.5, PM10, TSP. , noise, and other monitoring factors. Data can be synchronized to the mobile phone and computer through the 4G network for administrators to query and manage. At the same time, the data can also be connected to the upper level supervisors such as the Environmental Protection Bureau and the Construction Committee to facilitate supervision. It is suitable for air quality monitoring such as construction sites, road traffic, urban environmental protection, etc. The main monitoring factor of the monitor is a pump-assisted laser dust sensor with independent intellectual property rights developed by our company. The sensor has high measurement accuracy. Good consistency, fast response, wide range, and low maintenance. The sensor has obtained a patent certificate issued by the State Intellectual Property Office. The “Environmental Air Quality Monitoring Cloud Platform Management Software†independently developed by the company has registered software and obtained certificates at the China Copyright Protection Center.
Standard four elements (TSP, PM2.5, PM10, noise) dust noise pollution monitoring system features ◎ real-time synchronous measurement of noise and PM2.5, PM10, TSP mass concentration; at the same time can expand meteorological multi-parameters, gas and other parameters ◎ Using laser scattering method to measure dust particles, fast response and wide measuring range ◎ Pumping sampling design, uniform air intake, stable flow, higher monitoring accuracy ◎ Based on Monte Carlo method, successfully overcome the data Accuracy problem, 媲 US control point monitoring data ◎ Industrial grade ARM processor, stable performance, low power consumption ◎ Optical module with sheath gas protection system to prevent surface contamination of optical components, improve measurement accuracy and operational reliability ◎ With DHS The dynamic heating dehumidification system effectively suppresses the influence of temperature and humidity on the measurement results and improves the accuracy of the measurement results. ◎ The host adopts industrial grade GPRS wireless communication module to ensure real-time transmission of various monitoring data. ◎ Adopt national standard communication protocol (HJ/T212) -2005), expandable special communication protocol to ensure the system and monitoring equipment Capacity and Scalability ◎ The host has a GPS positioning module, which can record the location of the monitoring device in detail, which is convenient for monitoring and management. ◎ You can log in to the online supervision platform through the computer terminal to perform real-time query on the monitoring data. ◎ Real-time query and monitoring through the mobile client Data, view WeChat push information, receive over-standard SMS alarm, etc. ◎ Optional video monitoring unit can monitor real-time monitoring of on-site construction activities; image capture based on set dust concentration threshold, and automatic upload for remote forensics ◎ Equipment materials And the process standards are designed in accordance with RoHS requirements, which is more conducive to human health and environmental protection. ◎ The host adopts high-strength spray plastic waterproof casing, which is sturdy, dustproof and moisture-proof. It is suitable for various harsh environments. ◎ AC220V (optional solar power supply)
Standard Four Elements (TSP, PM2.5, PM10, Noise) Dust Noise Pollution Monitoring System Parameters Monitoring Indicators Measurement Range Resolution Accuracy Remarks
PM2.5 0-500ug/m3 1ug/m3 ±10%
PM10 0-2mg/m3 1ug/m3 ±10%
TSP 0～40mg/m3 1mg/m3 ±10%
Wind speed 0-30m, 0-60m (optional) 0.1m/s ±1m/s
Wind direction 0～360°/16 azimuth 1° ±3°
Noise 30~130dB 31.5Hz~8kHz ±1.5dB
Temperature -30～+70°C 0.1°C ±0.3°C
Humidity 0～100%RH 1%RH ±3%RH
Pressure 500～1100hPa 0.1 hPa ±0.3hPa
Data acquisition and processing system Mains 220V power supply AC220V
Communication mode RS485/232 communication, USB communication 3G/4G, WIFI wireless transmission, ADSL fiber and other wired transmission Standard 3 meter bracket height can be customized Outdoor HD LED screen size 105*55cm Four lines display with control system and waterproof frame
Standard four elements (TSP, PM2.5, PM10, noise) dust noise pollution monitoring system application areas and after-sales service are mainly used in construction sites, demolition sites, coal mines, industrial parks, highly polluting enterprises, environmental big data centers, communities, On-line real-time monitoring of ambient air quality in urban environments, residential quarters, etc.
After-sales service plays an important and irreplaceable role in today's IT projects. Without perfect after-sales support services, any system is unreliable or even dangerous to users. Over the years, we have accumulated rich experience in technical support services in dust pollution monitoring and other industry project implementation and service processes, and established a comprehensive cascade maintenance service system. After delivery, the hardware is free to use for 12 months, and the quality of the software system itself is guaranteed for 24 months. If there is a problem during this period (not including the added function), the problem is solved by remote or on-site at 72. Eliminate hidden dangers within hours. In order to ensure the safe and stable operation of the dust monitoring and monitoring system, we will provide various forms of after-sales technical services, including on-site service, telephone maintenance, remote maintenance, and system after-sales technical services.
1. On-site service:
1) Regular maintenance. The company implements a regular inspection system for system maintenance engineers. Engineers sent by the company regularly visit customers to find problems, solve problems, and understand new needs. This will enable early detection of hidden dangers in the system and timely solve related problems in the use of the system. At the same time, we can understand the new requirements and provide good business support for the further upgrade of the system.
2) Emergency maintenance: Strictly abide by the commitments during the free warranty period and the free warranty period. The troubleshooting time varies depending on the degree of impact of the fault.
2. Telephone maintenance The system user can call the customer service hotline provided by the company and directly contact the company's after-sales center. The company's maintenance engineers can directly answer and solve various problems raised by the system user through telephone.
3. Remote maintenance When the network conditions permit, we can directly carry out remote maintenance and system upgrade and update system software after-sales technical service through the Internet.
4. System after-sales technical service The company will provide upgrade and technical support services for the application software after system acceptance, and provide system maintenance support services.
Gel Battery,Gel Cell Battery,Gel Battery For Car,Gel Type Battery
Power X (Qingdao) Energy Technology Co., Ltd. , https://www.solarpowerxx.com