Type 652 Waterstops - Buried Waterstops

The buried rubber waterstop is the most commonly used waterstop. Buried refers to a construction process, it can also be said that the position of the rubber water stop in the construction; that is, the buried rubber water stop is to be poured into the concrete layout. The buried rubber waterstops are mainly divided into two major categories: CB type and CP type in the market. The center of the rubber waterstop belt is CB type, and the center type is CP type. The common type 651, 652 and 653 waterstops are classified as CB type rubber waterstops. Many different types are often subdivided according to different sections.

652 type water stop

652 type rubber waterstop belt is a type of rubber with high elasticity and compressive deformability, resulting in elastic deformation under various loads, thereby acting as a tight seal to effectively prevent leakage, seepage, and shock absorption of building components. The effect can effectively solve the problem that when the concrete is cast in place, the water stop band is set in the construction joint or deformation joint and the concrete structure is integrated, and the service life of the engineering building is ensured.

652 type rubber waterstop performance:

652 type rubber water stop is two waterproof lines on each side,

Adaptation temperature: ordinary type: -25 Â°C -60 Â°C; cold-resistant type: -40*C-60 Â°C

652 type rubber water stop use:

It is mainly used in the permanent deformation joints that must be provided when the concrete is cast in place, such as water channels, tunnel exits, retaining dams, and aqueducts.

Production company: Hengshui Jianfeng Engineering Rubber Co., Ltd.

Contact person: Wan manager 18703187870 (can add micro) QQ

Cooperatives: China Railway Construction, China Communications International Bureau, China Railway IV Bureau, China Railway 16th Bureau, China Railway Port Authority, China Communications Construction.

Dual Mining Power Supply 4000W

Product details

Features:

1.Using a new large-capacity large magnetic ring material, the performance is very stable.

2.Efficiency, very quiet, stable performance.

3.Heavy-duty protections, including Over Voltage Protection, Under Voltage Protection, Over Current Protection, Over Power Protection, and Short Circuit Protection.

4.he conversion rate is as high as over 95% (while the conversion rate of passive PFC is usually below 70%), and the efficiency is as high as 95%, which can reduce electricity bills. More energy saving! More environmentally friendly!

5.With cooling fan, safer for using this.

1 x Mining Power Supply

Using a new large-capacity large magnetic ring material, the performance is very stable.

1600 to 4000W Mining Power Supply Miner Mining For ETH Rig Ethereum Miner S9 S7

Mining Power Supply

1600/1800/2000W Miner Mining

For ETH Rig Ethereum Miner S9 S7 L3+ Plus

power supply for mining,dual psu mining,mining psu 2000w,multiple psu mining rig,2400w mining psu

Easy Electronic Technology Co.,Ltd , https://www.yxpcelectronicgroups.com