PLC debugging and use - Solutions - Huaqiang Electronic Network

Manufacturers produce direct sales LED lamp bead patch lighting products 0805 white light super bright indicator light dedicated

The probe capacitor polarity needle has a head diameter of 5.8. The total length of the 7-pin and 12-pin needles is 5.

Kaixin micro test

Adjustable capacitor Murata genuine original

SMD aluminum electrolytic capacitor

In our lives, we often come into contact with the word debugging, because many of today's instruments and equipment are getting more and more sophisticated, so debugging is required before use, but do you know the debugging of Schneider plc? I will introduce you to the debugging and use of PLC, so that we can have more knowledge to enrich ourselves.

PLC is simply an electronic device. This device is generally used in specialized industries, so it has its own unique methods and methods when debugging. When debugging, we must first check the line and determine the address. When checking the line, we must know what the line is doing, whether it is really installed, and when we check the address, we must determine the reliability of the address. Sex. At this point we debug the first step. If there is an indicator light on our control panel, then we must look at the work of the indicator light when we debug. If it is normal, our future inspection is relatively convenient, and the damage of the indicator light is also Very important point, so we have to pay special attention to the existence of this problem. In addition to these automatic checks, we have to do some manual checks and debugging. We need to determine if there is a corresponding signal output in each manual and it is correct at the output frequency. Then we can carry out the test system is not able to work semi-automatically, and then in the problem of determining fully automatic work.

PLC debugging is very important before use. We must pay attention to the existence of this link in the process of use, carefully to debug each place, so that we can use it when we use it.