The voice reporting circuit consists of a nose switch, a trigger timing circuit, a voice circuit and a power supply circuit, as shown in the figure.
The nose electronic switch consists of a model rubber nose and its linked switch SA amplifier VT1. Normally, the SA is in the off position. When the player touches the elastic nose before closing the eyes, the switch SA is closed due to vibration, VTl is biased and saturated, and the tube pressure drop of o.3v causes the IC1 to trigger. Bit.
IC1 uses time base circuit 555, which forms a trigger timer with R3, Cl, etc., once its 2 pin gets low power (<1/3VDO) trigger, it is set and timed, and its timing depends on C1 through R3. The time constant charged to 2/3 VDu, ie td=1.1R3C1, is designed to be 10 seconds.
IC1's high-power output provides operating power for IC2. IC2 uses the voice integrated circuit KD-56023, which has a "haha laugh" voice signal. The statement length is 3 seconds. Each time it is triggered, the laughter will cycle for three cycles. The typical working voltage of the chip is VDD=3V. This circuit directly connects its trigger terminal TRIG and the power supply VDD. During the high level after IC1 is set, it simultaneously receives power and triggers, and immediately plays the "haha laugh" sound. It shows that the player has succeeded in the nose. The quiescent current of KD-56023 is about 1?A, and the current consumption of the electrode is small.
The step-down rectifier circuit is composed of a step-down capacitor C5 and a rectifier QD and a filter capacitor C4. The rectified DC voltage is regulated by R6 and DW2, and the voltage of +9V is regulated as the supply voltage of ICl and IC2. The step-down capacitor C5 should be a non-polarized metallization capacitor with a withstand voltage of not less than 400V.
Low Voltage Energy Storage
LFP 5-10kWh / LV
LiFePO4 BATTERY, 51.2V 100/200Ah
LFP5-10kWh/LV is the latest Wall Mounted Lithium Battery for Home Energy Storage system. It is based on lithium iron phosphate batteries and equipped with customized BMS. 6000+ high cycle times, long service life, stylish appearance design, make it popular with many customers, and suitable for daily charging and discharging application scenarios.
Low Voltage Energy Storage LFP2400/LFP5000
LFP2400, LFP5000 are hot-selling Rack Mounted Lithium Batteries provided by Sunket with our abundant experience for Home Energy Storage. It` s long life character, high energy and power density in the industry, fashionable design, easiness of installation and expansion, all reflects the real requirements of end users and strongest technical capability of Sunket.
T200/T500
Portable Power Bank
Portable power bank is the definition of a new way of life. It adopts high-safety lithium iron phosphate battery and integrates various power ports.
It is suitable for the operation of lighting, small household appliances, mobile phones, cameras, notebook computers, vehicle electrical appliances, automotive emergency start, medical emergency equipment and other products in off-grid or power failure scenarios such as indoor backup, outdoor activities, car self-driving tours, and emergency rescue.
High Voltage Energy Storage 30kW/92kWh
·Small size, high integration
·User-defined operating mode is easy to set
·Support on-grid and off-grid switching
·Installation and access points for supporting microgrid energy devices
·Comprehensive energy management, real-time dynamic operation monitoring
·AI cloud computing data processing, intelligent management and control
Solar Battery for Solar System,Home Energy Storage,
Wuxi Sunket New Energy Technology Co.,Ltd , https://www.sunketsolar.com