With the launch of the millet-miami laser television, the laser TV camp has welcomed another player. However, as for the price of the Mijia laser TV, doubts have come. Given the price of Mijia Laser TV at 9999 yuan, it is difficult to find a laser TV with the same price in the market. I had to choose a better-selling nut (JmGO) S1 laser TV as a reference for these two projection products. Detailed comparison.
Laser TV is different from the traditional projection technology. Thanks to the characteristics of laser light sources, the screens presented by laser televisions have vivid colors and high brightness. Under a certain device environment, the display effect is almost comparable to that of LCD TVs. With the development of display technology, laser display technology is also considered to be a powerful contender for next-generation display technologies.
Mijia Laser TV and Nut S1 Laser TV belong to ultra-short focus projection, which means that it is almost free of space constraints. It can also throw a large screen against the wall. Take the Nut S1 laser TV as an example. The rear end of the fuselage is away from the wall. At 30cm, a 100-inch screen can be projected. Specific to the transmission ratio, the transmittance of the nut S1 laser TV is 0.25:1, while the transmittance of the Mijia Laser TV is 0.233:1, which can cast a large screen of 150 inches.
In terms of display technology, nuts S1 supports DLP LINK 3D display technology, 3D effects can be enjoyed by wearing 3D glasses, and Mijia Laser TV adopts the latest ALPD 3.0 display technology from Guang Feng, while improving the display effect, Can effectively guarantee the life of the light source exceeds 25000 hours. By the way, both products are powered by electric zoom. Compared with manual zooming, the operation is very convenient and the zooming process is more stable.
The main hardware contrast is chip and storage. Mijia Laser TV uses a T968 quad-core CPU with a 64-bit Cortex-A53 architecture. This CPU has also been used in the millet TV 3S and has performed well. With the Texas Instruments 0.47-inch DMD chip and the 2GB DDR3+16GB eMMC storage portfolio, taking into account its pricing, the hardware-friendly performance is still satisfying. Nuts S1 is equipped with a MStar 64-bit quad-core processor and a 6-core GPU Mali 450 MP4. The official storage does not give clear information, but after querying that the same 2GB +16GB combination, it did not give us too much. Surprise.
The other is the interface, Mi-laser TV in the back end with Ethernet port x1, SPDIF x2 (coaxial /optical), Audio out, AV 3.5, USB3.0, HDMI2.0/ARC, HDMI2.0, also intimate The establishment of a USB2.0 interface on the side, it can be said to fully meet the needs of users of external devices. The nuts S1 also performed well, with USB3.0x2, USB2.0, HDMI2.0, HDMI1.4, RJ-45 Ethernet interface, Audio Out, S/PDIF, and Mini USB, AV in, and TV Tuner interfaces. It can be seen that these two projection devices provide a rich interface, in fact, this is also related to the positioning of the product itself, laser projection scalability is much higher than ordinary LCD TVs, rich interface provides users with a pole With its large playability, for a fresh species such as laser projection, playability will appeal to many young consumers.
Smart TV/box information can focus on smart TV information network sofa butler (http://), China's influential TV box and smart TV website, providing information, communication, etc. on TV boxes, smart TVs, smart TV software, etc. Answering questions.
Mi laser projection
Nut S1
As mentioned above, the selling prices of the two products are very different. The price of Mijia Laser TV is 9999 yuan, which is relatively more close to the people, while the price of 22 million (JmGO) S1 laser TV is more than twice the price. Therefore, this comparison can only be used as a reference for consumers to select projection products, and has no other meaning. Laser TV is different from the traditional projection technology. Thanks to the characteristics of laser light sources, the screens presented by laser televisions have vivid colors and high brightness. Under a certain device environment, the display effect is almost comparable to that of LCD TVs. With the development of display technology, laser display technology is also considered to be a powerful contender for next-generation display technologies.
Mijia Laser TV and Nut S1 Laser TV belong to ultra-short focus projection, which means that it is almost free of space constraints. It can also throw a large screen against the wall. Take the Nut S1 laser TV as an example. The rear end of the fuselage is away from the wall. At 30cm, a 100-inch screen can be projected. Specific to the transmission ratio, the transmittance of the nut S1 laser TV is 0.25:1, while the transmittance of the Mijia Laser TV is 0.233:1, which can cast a large screen of 150 inches.
Nut S1
In terms of resolution, Mijia Laser TV and Nut S1 Laser TV are both 1080P, compatible with 4K resolution. It is worth noting that the compatible resolution refers to the resolution of the input signal that the TV can support. It is not necessarily related to the actual screen display. But in terms of contrast, the nuts and S1 laser TVs are even better at 3001-5000:1, while the Mijia Laser TV has only 2500-3000:1. In general, the greater the contrast, the clearer the picture will be. On the contrary, the lower the contrast, the more the picture will give a feeling of grayness. In terms of color performance, the color range of Mijia Laser TVs is up to NTSC 80% ~ 85%, while the nut S1 laser TV does not give a specific value. It only means that "nut S1 supports 1024 gray scales, and the color gamut range Very broad." Mi laser TV light source brightness 5000 lumens
Nut S1 light source brightness 13000 lumens
Nut S1 3000 ANSI lumens
What is worth mentioning is the brightness issue that people are more concerned about. This is quite controversial. There are Tucao said on the Internet, Mijia Laser TV has opened up a new technical term for light source brightness. In fact, on the product introduction page of the Nut S1, there was a slogan “Light Source Brightness of 13,000 Lumensâ€, and the Nut S1 was released last year. The Mi Jia Laser TV is really heavy, but it’s not ! Because the nuts S1 also gives a regular, accurate value in line with international standards, 3000 ANSI lumens. On the other hand, millet has only one 5,000 lumens measured by itself. If the conversion rate is based on the ratio of nuts S1, the brightness of Mijia laser TV is between 1100 and 1300 ANSI lumens. In terms of display technology, nuts S1 supports DLP LINK 3D display technology, 3D effects can be enjoyed by wearing 3D glasses, and Mijia Laser TV adopts the latest ALPD 3.0 display technology from Guang Feng, while improving the display effect, Can effectively guarantee the life of the light source exceeds 25000 hours. By the way, both products are powered by electric zoom. Compared with manual zooming, the operation is very convenient and the zooming process is more stable.
The main hardware contrast is chip and storage. Mijia Laser TV uses a T968 quad-core CPU with a 64-bit Cortex-A53 architecture. This CPU has also been used in the millet TV 3S and has performed well. With the Texas Instruments 0.47-inch DMD chip and the 2GB DDR3+16GB eMMC storage portfolio, taking into account its pricing, the hardware-friendly performance is still satisfying. Nuts S1 is equipped with a MStar 64-bit quad-core processor and a 6-core GPU Mali 450 MP4. The official storage does not give clear information, but after querying that the same 2GB +16GB combination, it did not give us too much. Surprise.
Mi Jia Laser TV
Sound effects are also the focus of many consumers. Mijia Laser Projection TV adopts a custom speaker system developed by Xiaomi TV. It has built-in high-power dual full-frequency and dual-frequency high-fidelity speakers. It has a unique cavity phase tube design and supports three external audio modes. This is very effective for audiophiles. Friendly, also supports Dolby/DTS dual decoding. On the other hand, the sound effects of the Nut S1 are not bad. The host has a built-in stereo HIFI stereo and a symmetric two-channel sound that cancels the vibration noise and ensures balanced sound output to achieve surround sound effects. It is worth mentioning here that the nuts S1 also uses carbon fiber diaphragms and silk diaphragms on the speakers, high-pitched and bassy. Nut S1
The biggest advantage of Mijia Laser TV may be embodied in the system content. Thanks to the integrity of Xiaomi's ecological chain, Mijia Laser TV uses the same MIUI TV system as Xiaomi TV, including all the contents of Xiaomi TV. Of course, users can also Like millet TV, install high-quality third-party applications such as sofa butlers on Mijia Laser TVs to carry out reasonable resource development. The nuts S1 is based on Android 5.0 developed JmGO OS, content resources are all from iQiyi library, compared to the massive content of millet TV, nut S1 layout in the content has yet to be strengthened, but fortunately JmGO OS system The openness also brings more possibilities to users. The other is the interface, Mi-laser TV in the back end with Ethernet port x1, SPDIF x2 (coaxial /optical), Audio out, AV 3.5, USB3.0, HDMI2.0/ARC, HDMI2.0, also intimate The establishment of a USB2.0 interface on the side, it can be said to fully meet the needs of users of external devices. The nuts S1 also performed well, with USB3.0x2, USB2.0, HDMI2.0, HDMI1.4, RJ-45 Ethernet interface, Audio Out, S/PDIF, and Mini USB, AV in, and TV Tuner interfaces. It can be seen that these two projection devices provide a rich interface, in fact, this is also related to the positioning of the product itself, laser projection scalability is much higher than ordinary LCD TVs, rich interface provides users with a pole With its large playability, for a fresh species such as laser projection, playability will appeal to many young consumers.
Mi Jia Laser TV Interface
Nut S1 interface
In addition to the device itself, the screen has a great effect on the display effect of the laser projection. Because of this, the price of a good curtain is basically around three or four thousand, but in general, the curtain will be presented as a random device. But there are exceptions, yes, Mijia Laser TV is the exception, it does not send the curtain! Do not send curtains! Do not send curtains! If you think of the price of 9999 yuan, you may be able to relieve yourself. But what is certain is that whether or not the screen directly affects the user's viewing experience, so the friends who are planning to purchase Mijia Laser TV will automatically add 4,000 pieces to the 9999. Nut S1 anti-light screen
In any case, Xiaomi's move into the field of laser television is worthy of recognition. The ultra-high price-to-price ratio of Mijia Laser TV is 9999 yuan. However, it is shameful for the parameters and the measures to control the price and cancel the curtain. As mentioned at the beginning of the article, there is currently no product on the market that has the same price as Mijia Laser TV, so we have no reason to put too high a demand on it at such a low price. The nuts S1 as a product for more than a year of sale, also successfully completed the product change, the upgraded version of the nuts S1 Pro's outstanding sales, brightness and other aspects have also been a substantial upgrade over the previous generation products, stable and occupy the mainstream market. Smart TV/box information can focus on smart TV information network sofa butler (http://), China's influential TV box and smart TV website, providing information, communication, etc. on TV boxes, smart TVs, smart TV software, etc. Answering questions.
Fume Ultra Vape,Fume Ultra Disposable Vape,Fume Ultra Disposable 2500 Puffs,Fume Ultra 2500Puffs Vape
YIWU JUHE TRADING COMPANY , https://www.nx-vapes.com