Teach you to install a home light strip, it's perfect!
Release date: 2018-06-01 Source: Lighting industry information sharing: 
The light strip is now a common lighting product in home decoration. Its light is soft and it is easy to create different light by changing its angle. For the installation of the light strip, Xiaobian to interpret it.
First, the lamp belt installation steps
The required length of the 1 lamp strip is to be cut off.
If it is 4.4 meters, it must take 5 meters. Why? Because the lamp strip is a unit of 1m, it will not affect the circuit only if it is cut off from the cut port. If it is cut at will, it will cause one unit to be off.
2 light with interface plug can not be reversed
The light strip is not very LED diode, DC drive, so there is a positive and negative pole, if the positive and negative poles are reversed, the light strip will not light up. If the connection plug is not energized, just remove the other end of the strip.
3 correctly placed the light strip
Most of the light strips are the original packaging of the coiled wire. The newly removed light strips will be distorted. It is not easy to install. It can be leveled and placed in the light trough.
Since the light strip is single-sided, if the unevenness is placed, there will be uneven brightness and darkness, especially at the corners.
4 pay attention to the installation environment
Most of the lamp strips are installed in the slots around the ceiling. The dust in the slots must be cleaned, because the dust can easily cause an open flame when exposed to heat.
Second, the ceiling lamp with installation precautions
1. When the whole reel is unpacked or piled up, do not energize the lamp strip, because the magnetic field brought by the coil is very strong and the heat is large, which will cause a fire.
2. When cutting the lamp strip according to the installation length, it can only be cut at the place where the scissors mark is printed, otherwise one of the units will not light.
3. Only the Lihua Lanterns with the same specifications and the same voltage can be connected in series, and the total length of the series cannot exceed the maximum allowable length.
4. When the power supply or the two lights are connected in series, first bend the head of the lantern to the left and right, so that the wires inside the lamp strip are exposed about 2-3 mm, cut with a cutting pliers, no burrs, and then use the public Connect to avoid a short circuit.
5. When the lamp strips are connected in series, each time a section is connected, a section is tried to lightly, so as to find out whether the positive and negative poles are connected correctly and whether the direction of light emission of each strip of light is consistent.
The steps of installing the ceiling lamp with the steps can be completed in 3 steps. Of course, the installation should also pay attention to the specifications. Everyone should pay attention to the above precautions to ensure a smooth installation. Finally, it is still necessary to pay attention to safety issues and safety first.
More lighting information is available at https:// .
Label: lamps wholesale lighting procurement lamps to join billion lamp network
Pentium Mini Pc,Mini Desktop Computer,Micro Personal Computer,Mini Pc Portable
Shenzhen Innovative Cloud Computer Co., Ltd. , https://www.xcypc.com