VST live separately version 2.2.0 (aka: Wei Wei live) custom tutorial

Before using, you must know in detail: vst all polymerization version 3.1.2 and later, live broadcast has been separated out, that is, VST live broadcast 2.2.0, in your TV smart TV or box installation "VST live broadcast. Apk (version: 2.2. 0)” Open the network settings of the device (smart TV or box) to check your intranet IP address (general intranet IP: 192.168.xx.xx) XX is not fixed, even some are (10.xx .xx.xx), whichever is shown above. Note that the VST live streaming device and the pushed computer must be on the same LAN.

Preparation is complete!
Download and install VST live (separate version) from the sofa butler (install tutorial: http://):

Instructions
Hide the contents of this post
On the device (smart TV or box) turn on "VST Live", then on your PC, use Google Chrome to enter the URL "http://192.168.xx.xx:8050/vst" (IP+VST Live Streaming Port 8050) If no accidental browser displays the following picture:

Congratulations, seeing this page proves that you are very clever, can interact with VST, have simple features to explore for yourself, and finally select the tv.txt custom file that your PC is ready to upload, until you see this prompt!
Ordinary tv.txt file format

Multiple sources are used separately and also support the classification of tv.txt format.
Select a document

Show success


See this prompt, then re-run "VST Live" on the device (smart TV or box), press your (smart TV or box) device remote control (OK/OK) button to open the channel list, press the far left category, You will see the "push" category to prove success! Re-push a new tv.txt file to overwrite previous ones.



Fiber Optic Splice Closure

Fiber Optic Splice Closure,Fiber Optic Splice Case,Fiber Splice Closures,Outdoor Fiber Optic Splice Closure

Cixi Dani Plastic Products Co.,Ltd , https://www.danifiberoptic.com