500kV Transmission Line Engineering of the 4th Jilin-Liaozhou Transmission Line Enters the State Grid's Excellence Stage

With the convening of the fourth batch of high-quality engineering inspection and report meeting of the State Grid Corporation of China in October 26th, the 500 kV transmission line project of the Shenyang UHV Bureau for the four-circuit line of the Jilin Province officially entered the stage of excellence of the State Grid.

It is reported that the transmission line project of the 500kV four-circuit line of the Jilin-Liuzhou Power Transmission Project is approved by the National Development and Reform Commission and approved by the Northeast Power Grid Co., Ltd. The State Grid Corporation of China is responsible for the investment and construction of the key projects of the "Eleventh Five-Year Plan" of the State Grid Corporation of China. The accumulated static investment is 59.52 million yuan, July 24, 2009. Completed the entire line. The project started at the 500kV Hexin substation in Changchun City, Jilin Province, passing through the 500kV Lishu substation in Siping City, Jilin Province, Tieling Power Plant in Tieling City, Liaoning Province, and Shendong 500kV substation in Shenyang Bureau. The successful construction and commissioning of the 500kV transmission line project of the Jilin-Liu four-circuit line will be beneficial to strengthening the 500 kV grid structure of the Northeast Power Grid Jilin Province, which will also help improve the power supply capacity of the power grid and meet the load development needs of Liaoning Province, and provide strong power for the Liaoning regional power grid. And strong basic support and power supply security.

Dowell Group Insertion Tools used in all kinds of connection module types. Main have Quante SID insertion tool, Pouyet Tools, Alcatel Tool, Corning Tool, Siemens Tool, Ericsson Tool, Krone Tool, ZTE Tool, Huawei Tool, Tyco Tool etc.

  Quante SID module punching tools SID-standard insertion tool for connection of wires;For Quante SID System; insertion Colour: red.

   Impact and Punch Down Tool for 5E Nortel type .Bix Punch Down Tools, Bix Punch Tools, Nortx Style Tools, Punch Tools, an insertion tool used to connect single wires to MCCS BIX Connectors.Used For 25 pair BIX Distribution Strip.The head of bix inserter 8A

    With pressure sensor and extracting hook to free wires for soldering, screwing and skinning in preparation for connection and at the same time cutting off any excess length.
An IDC terminating tool for use on 10 pair Disconnection Strips 237A. It incorporates an extraction hook which assits in the removal of terminated wires.

64172055-01 KRONE LSA-PLUS RJ outlets.

     The networking tools we can offer including sort of insertion tools, impact and punch down tool (Ericsson punch down tool, Siemens punch down tool, Corning punch down tool and so on), crimping tool(RJ45 Crimping Tools, coaxial cable crimping tool, picabond ratchet crimper), cable stripper and cutter, cable tester and connector removal tool, and so on.
     In short, we offer the networking tools for cutting and stripping coaxial cable, twist cable, and optical fiber. And professional compression crimping tool for different connectors, insertion tools for different modules .To save cost for customers, we have desired some tools with multi-function. So you can keep one tool instead of several different types. Meanwhile, for some coaxial cable crimping tool you can change the head to fit the cable specification yourself. It will make you lose weight on tool set but to finish your work perfectly.

Insertion ToolsInsertion ToolsInsertion Tools

Insertion ToolsInsertion ToolsInsertion Tools

YH-8050

Punch Down Tool for Patch Panel Terminal Block

YH-6417 2 055-01

Krone type insertion tool with sensor for Krone and 110 terminal block.

YH-8017

110/Network/Krone punch tool

YH-8030

Tyco Punching tool for 10pairs modules

YH-8060

Punch Down Tool for Patch Panel Terminal Block

YH-8071

Bix type insertion tool,Inserter wire 9A

YH-8072

Porta insertion tool Inserter wire 8A,used on jack tests.

YH-8076

SID module punching tools .SID-standard insertion tool for connection of wires; insertion Colour: red

YH-8027

Huawei type punch down tools DXD1.

YH-8031

Ericsson type punch down tools,color white.

YH-8074

Ericsson type punch down tools,color green.

YH-8073R

Corning type punch down tools,use on corning type 5000 block,C39407-A139-A12.

YH-8073B

Siemens type punch down tools,use on siemens type 71 block,C39407-A139-A09.

YH-8029

Punch down tool on 10pair krone module and pouyet module.

YH-8021

Simple crimping tool for 3M connectors UY,UR,UG

YH-8028

Crimping tool for 3M connectors UY,UB,UR, UG,UIB,UIY,UAL, UBCO,UYCO,UIR, UDW,UDM,Super mini,cross.

YH-8026

RJ45 8P8C terminal crimping tool

YH-8075

multi-function modular jack termination tool

YH-8077

Insertion tool for Quante ID3000 MDF

YH-8078

Sunsea XD-B1 insertion tool

YH-8079

ZTE MDF compact punch down tool,FA6-09A1 FA6-09A2

YH-8080

ZTE MDF compact punch down tool FA6-09B1

 

FAQ:

Q: Are you trading company or manufacturer ?

A: We are factory.
Q: How long is your delivery time?
A: Generally it is 3-5 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=5000USD, 100% in advance. Payment>=5000USD, 30% T/T in advance , balance before shipment.
If you have another question, pls feel free to contact us as below


Insertion Tools

Insertion Tools,Extractor Tool,Pin Insertion Tool,Pin Extraction Tool

DOWELL INDUSTRY GROUP LIMITED , http://www.dropwirechina.com